DESCRIPTION:

The body of the Industry V halogen lamp is produced from aluminium alloy by pressure casting and equipped by thick ribbing on the external surface. Ends of the ribs are significantly colder than the body itself so there is no need to decrease contact temperature with second protective cover behind which impurities usually accumulate.

The edge of the reflector is perforated thus inner air circulation in the lamp is enabled. The surface temperature of the protective glass is significantly reduced (15 °C) by this simple passive technique. The grip of the lamp is equipped with a toggle switch with ingress protection IP67.

The luminary is fixed with 3 joints metal arm and the metal stand with four holes for installation. Supply cable outlet can be feed underneath or through the gland on stands wall. The fixture can be completed with switchable magnetic holder or desk clip.

To keep a declared lifetime of the halogen bulb it is necessary to ensure supply voltage in the range -15% až +0% of the declared value, environment working temperature is -20 až +60°C.

TECHNICAL  SPECIFICATION:

Version 24V

– Supply voltage 24V DC or AC (RMS)

– Light source halogen bulb 24V/100 W with axial filament and G6.35 base

– Luminous flux 800 lm

– Bulb lifetime 2000 h

– Ingress protection IP67

Version 12V

– Supply voltage 12V DC or AC (RMS)

– Light source halogen bulb Osram Halostar  IRC 12V/35 W with axial filament and G6.35 base

– Luminous flux 900 lm

– Bulb lifetime 4000 h

– Ingress protection IP67

ADVANTAGES:

– Low frontal glass temperature suppresses lubricant clinkering

– High ingress protection IP67

– Low temperature of contact surface thanks to original construction

– Robust arm with big setout and high braking force

DIMENSION:

– Luminary body diameter 140 mm

– Luminary body length 101 mm

– Stand height 46 mm

– Arm length 400 mm

Stand fixing holes dimensions:

LIGHT DISTRIBUTION: